TecQuipment PLC Process – CE111

TecQuipment      Warranty      PDF

Product Code: CE111

Description

Provides a physical system on which students can gain experience in the programming of programmable logic controllers (PLCs). The process is a model of a two-tank system typical of a chemical process in which liquids are measured before being mixed. The task for the student is to control liquid level and flow. For use with the PLC Trainer (CE123).

The apparatus has two transparent tanks, mounted one above the other. A variable-speed pump transfers water from the reservoir (in the base of the unit) into the upper tank. The water can drain down to the lower tank and then back into the reservoir. Solenoid valves may be individually opened or closed to control and redirect the movement of the water. The pump control is on or off, but a manual control allows the user to set the speed. A float switch in the reservoir monitors the level of water. Each tank includes two level sensors which measure maximum and minimum water levels. An in-line flow sensor provides a pulsed output. Its frequency is proportional to the flow rate and the number of pulses proportional to volume.

Indicators next to each input and output socket show the on/off status of the pump, the valves, the maximum and minimum level in each tank, and the flow rate.

An overflow in each tank prevents accidental overfilling.

Key features:

  • Compact, bench-mounting unit
  • Connects to TecQuipment’s PLC Trainer (CE123) to mimic a realistic industrial process
  • Allows basic and advanced studies of programmable logic controllers (PLCs) in industrial applications
  • Shows control of liquid flow, volume and level in two tanks
  • Includes a selection of fully controllable valves to give many different liquid levels and flow control experiments, including batch processing
  • Front panel includes mimic diagram of the process so students can clearly see what they are controlling

Learning outcomes

When used with the CE123:

  • Basic programming of a PLC
  • Basic level control
  • Tank filling sequence
  • Simulated batch processing (sequencing)
  • Ladder logic programming
  • Editing and adding comments in a PLC program – The open structure of the CE111 and CE123 allows the user to create additional experiments to suit their needs.

PDF

Included products

  • TecQuipment PLC Trainer - CE123Read more

    TecQuipment PLC Trainer – CE123