TecQuipment Advanced Hydrology and Rainfall Apparatus – H313V

TecQuipment      Warranty      PDF

Product Code: H313V

Description

This is the latest version of the Hydrology and Rainfall Apparatus, the H313, with new functionality for more detailed and advanced study including VDAS On Board.

The apparatus is a sturdy metal frame which holds a large rectangular stainless-steel tank (catchment area) and a reservoir tank. Students can fill the catchment area with a granular medium (available separately) to form a permeable catchment area.

A jacking mechanism allows adjustment of the angle of the catchment area. Above the catchment area is a frame that holds spray nozzles which simulate rainfall on the catchment. A valve selects all or half the nozzles. Students can use this facility to vary the lag time on a hydrograph or to simulate a moving storm.

At each end of the catchment area are end compartments, separated from the catchment by weir plates with porous ‘port holes’. Students can open the port holes to drain water from the catchment area, or to supply water to it from the end compartments.

In the middle of the catchment area are two ‘wells’ for experiments with water wells. A row of 20 tappings along the centre line of the catchment area allows students to measure the water table profile. Each tapping has special slotted ends to stop the permeable media entering its pipe. The tappings connect to a bank of piezometer tubes at the front of the catchment area.

A pump takes water from the reservoir and feeds it to the overhead nozzles and to the ends of the catchment area. Students can vary the flow to the nozzles and tank. A flow meter measures the overall flow.

Students can use a calibrated rectangular weir under the catchment area to measure flow from the wells or the tank.

The apparatus is completely self-contained and needs only a mains electrical supply. The permeable medium is not included with the apparatus, but TecQuipment offers a suitable grade of sand as an ancillary.


Key Features:

  • Permeable catchment area fed with ‘rain’ from overhead spray nozzles and/or by groundwater flow from ends of tank
  • Four groups of switchable spray nozzles supply the catchment area
  • Piezometer tappings to measure water table profile
  • Can measure ‘drawdown’ due to single or two interacting wells
  • Adjustable inclination of catchment area angle
  • Includes electronic flow meter to measure flow to the catchment area
  • Run-off end well flows measured by electronic flow meter
  • Self-contained – requires only an electrical supply
  • Comes with VDAS® Onboard featuring data acquisition via USB
  • VDAS® data acquisition works with software to capture flow rates, sedimentation rate (with the optional FCA1 pressure readings may also be captured)

Learning Outcomes:

  • Investigation of rainfall/run-off relationships for dry, saturated and impermeable catchments of various slopes (surface run-off only)
  • Effect of interflow on outflow hydrograph surface runoff (plus groundwater flow)
  • Simulation of multiple and moving storms (via the use of four rain banks)
  • Measurement of cone of depression for a single well and comparison with theory interaction of cones of depression for two adjacent wells
  • De-watering of excavation sites by use of wells
  • Flow from a well in a confined aquifer
  • Demonstration of watersheds for a simulated island with rainfall and well flows
  • Sediment transport and meanders in simulated rivers
  • Studies of scour around simulated bridge piers
  • Demonstration of erosion caused by water through flow